Fence Installation in Petaluma, CA
Wood fencing and gates built for Petaluma's mix of flat lots and hillside yards — set deep, braced for slope where the grade calls for it, and built to hold up through wet North Bay winters.

Signs You Need New Fencing
- Posts are visibly leaning or the fence racks side to side when pushed
- Boards are rotted or splitting at the base, near the soil line
- You're defining a new property line or adding privacy after a remodel
- A gate no longer latches or has dropped on its hinges
- You need a fence line that follows a slope instead of a flat lot
How We Build a Fence
1. Layout & line marking
Property lines, post spacing, and gate locations get marked and confirmed before any digging starts.
2. Post holes & setting
Holes are dug to depth and posts are set in concrete, plumb and aligned along the line.
3. Rails & framing
Horizontal rails go in first, stepped or racked to follow the grade on sloped sections.
4. Boards & gates
Fence boards and gates are hung last, checked for consistent spacing and smooth swing.
What Affects Fence Installation Pricing
Linear footage & height
Longer runs and taller fences (6-ft privacy vs. 4-ft picket) both add material and labor.
Terrain
A sloped fence line that has to be stepped or racked takes more layout time than a flat run.
Gates
Each gate adds hardware and framing beyond a standard section of fence.
Removal of old fencing
Tearing out and hauling away an existing fence adds to the job versus building on a clear line.
Fence Installation Across the North Bay
We install fencing throughout Petaluma and neighboring Rohnert Park,Santa Rosa, and Sonoma — sloped and flat lots alike.
Frequently Asked Questions
Do I need a survey before installing a fence on a property line?
It's the safest way to avoid a dispute with a neighbor over a fence line, especially on older Petaluma lots where the original survey markers may be long gone. We'll talk through what's known about the property line during the estimate and flag it if a survey looks necessary before we start digging.
What wood holds up best to North Bay weather?
Pressure-treated posts below grade are standard regardless of the fence style, since that's the part exposed to damp soil year-round. Redwood and cedar are common choices for the visible boards because they resist rot and insects better than untreated fir, which matters through Sonoma County's wet winters.
Can you install a fence on a sloped yard?
Yes — a lot of Petaluma properties aren't flat, so fence lines are stepped or racked (angled) to follow the grade rather than built level and left with gaps underneath. It takes more layout work than a flat-lot fence, but it's a normal part of the job here.
How deep do fence posts need to be set?
Depth depends on fence height and soil, but posts generally need to go below the frost/heave line and be set in concrete for stability — a fence with shallow or unset posts is the most common reason a fence leans within a year or two.
Can you match an existing fence style or replace just a damaged section?
Yes, when the existing material is still available and the remaining fence is in good shape — we'll tell you honestly if a full section replacement will look mismatched rather than sell you a patch job that won't blend in.
Ready to fence your property?
Call for a free estimate on your Petaluma-area fence installation.
